160D950827-541: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 16.340 INCHES NOMINAL IN, length: 22.320 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 4.000 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-1079, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 16.340 INCHES NOMINAL IN |
| length | 22.320 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 4.000 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-1079 |
| LENGTH | 22.320 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | RECTANGULAR WITH 3 CUTOUTS ON RIGHT/SHORT EDGE: 1.00WX1.00H, 1.28 & 7.06 & 13.78 INCHES FROM BOTTOM EDGE; 2 CUTOUTS ON LEFT EDGE: 1.26WX1.50H, 1.74 FROM BOTTOM AND 1.25WX1.00H, 13.14 FROM BOTTOM AND A CUTOUT ON TOP EDGE, 7.50WX7.40H, 4.38 INCHES FROM RIGHT EDGE WITH BOTTOM CORNERS ROUNDED: WITH RADII OF 1.75 ON LEFT & 1.00 ON RIGHT; AND A GROOVE, 2.40WX1.30D ALONG TOP EDGE, 1.00 FROM FAR SIDE SURFACE; FAR SIDE IS TAPERED 0.50 ON BOTTOM EDGE AND HAS MARKINGS: "UP AFT" NEAR TOP RIGHT EDGE (WITH FAR SIDE FACING UP) AND PART NUMBER BELOW IT IN |
| WIDTH | 16.340 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.