160D950827-515: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 17.200 INCHES NOMINAL IN, length: 22.320 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 4.000 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-0634, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 17.200 INCHES NOMINAL IN |
| length | 22.320 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 4.000 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-0634 |
| LENGTH | 22.320 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | RECTANGULAR WITH 3 CUTOUTS ON RIGHT/SHORT EDGE: 1.00WX1.00H, 2.40 AND 7.70 INCHES FROM BOTTOM EDGE, AND 1.00WX1.40H, 14.20 FROM BOTTOM , 2 CUTOUTS ON LEFT EDGE: 1.25WX1.00H, 2.20 FROM BOTTOM AND 1.25WX3.50H AT TOP CORNER, AND A CUTOUT ON TOP EDGE, 3.40WX5.30H, 11.00 FROM RIGHT EDGE; NEAR SIDE IS TAPERED 0.40 ALONG TOP EDGE; FAR SIDE HAS LENGTHWISE GROOVES, 2.50WX1.80D ALONG TOP EDGE AND 2.40WX2.00D ALONG BOTTOM EDGE AND A TRIANGULAR CUTOUT 1.25W ON LEFT EDGE (FAR SIDE UP) SLANTING FROM TOP SURFACE, 13.70 INCHES FROM BOTTOM EDGE TO OPPOSITE SURFACE, 8.40 FROM BOTTOM AND HAS MARKINGS "UP" AND "AFT" NEAR UPPER RIGHT CORNER (FAR SIDE UP) AND PART NUMBER CENTERED ABOVE LOWER GROOVE W |
| WIDTH | 17.200 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.