160D950827-511: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 15.090 INCHES NOMINAL IN, length: 23.320 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 2.500 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-0628, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 15.090 INCHES NOMINAL IN |
| length | 23.320 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 2.500 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-0628 |
| LENGTH | 23.320 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | RECTANGULAR WITH 3 CUTOUTS ON RIGHT/SHORT EDGE: 1.00WX1.00H, 1.20 AND 7.60 AND 12.80 INCHES FROM BOTTOM EDGE, 2 CUTOUTS ON LEFT EDGE: 2.00WX2.50H AT BOTTOM CORNER AND 1.25WX1.12H, 12.25 FROM BOTTOM EDGE, AND A CUTOUT FROM TOP EDGE, 6.50WX4.69H, 7.32 FROM RIGHT EDGE; NEAR SIDE HAS 2 CROSSWISE GROOVES: 1.25W, 12.52 FROM RIGHT EDGE AND 1.00W, 7.32 FROM RIGHT EDGE; FAR SIDE HAS MARKINGS: "UP" AND "AFT" ON 2 LINES NEAR UPPER RIGHT CORNER (FAR SIDE UP) AND PART NUMBER NEAR OPPOSITE EDGE BETWEEN BOTTOM CUTOUT/NOTCH AND NEXT ONE UP W |
| WIDTH | 15.090 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.