160D950827-437: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 16.260 INCHES NOMINAL IN, length: 22.320 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 2.500 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-1092, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 16.260 INCHES NOMINAL IN |
| length | 22.320 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 2.500 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-1092 |
| LENGTH | 22.320 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | RECTANGULAR WITH 4 CUTOUTS ON RIGHT/SHORT EDGE: 1.00WX1.00H, 2.10 & 5.00 & 9.60 & 13.70 INCHES FROM BOTTOM; A CUTOUT ON BOTTOM EDGE: 11.76WX1.16H, 2.96 FROM LEFT EDGE AND 2 CUTOUTS ON LEFT EDGE: 1.25WX1.00H, 2.84 AND 13.00 FROM BOTTOM; A RECTANGULAR CUTOUT NEAR UPPER RIGHT CORNER, 3.00WX2.00H, 9.40 FROM BOTTOM AND 4.36 FROM RIGHT EDGE WITH LINE CUT THRU FROM TOP OF CUTOUT TO TOP EDGE OF ITEM, 5.36 FROM RIGHT EDGE; NEAR SIDE HAS MARKINGS: P/N NEAR UPPER LEFT CORNER AND "UP" AND "FWD" ON 2 LINES TO THE RIGHT OF P/N; FAR SIDE HAS SEMICIRCULAR LENGTHWISE GROOVE WITH RADIUS OF 1.00 CENTERED 9.90 FROM BOTTOM IN |
| WIDTH | 16.260 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.