160D950827-337: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 16.360 INCHES NOMINAL IN, length: 20.890 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 2.500 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-1981, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 16.360 INCHES NOMINAL IN |
| length | 20.890 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 2.500 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-1981 |
| LENGTH | 20.890 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | RECTANGULAR WITH 1 CUTOUT ON RIGHT/SHORT EDGE: 1.16WX2.00H, 8.92 INCHES FROM BOTTOM; 1 CUTOUT ON BOTTOM EDGE: 16.73WX1.16H, 1.16 FROM RIGHT EDGE; 2 CUTOUTS ON LEFT EDGE: 1.25WX1.00H, 2.96 & 13.80 INCHES FROM BOTTOM EDGE; 1 CUTOUT NEAR CENTER: 9.79WX2.00H, 8.92 FROM BOTTOM AND 7.30 FROM RIGHT EDGE WITH LINE CUT THRU FROM RIGHT EDGE OF CUTOUT TO RIGHT EDGE OR ITEM; NEAR SIDE IS TAPERED 0.30 AT BOTTOM EDGE AND HAS CROSSWISE GROOVE: 1.16WX1.16D ALONG RIGHT EDGE AND A CUTOUT ON LEFT EDGE: 3.80WX2.00HX1.38D, 8.92 FROM BOTTOM; FAR SIDE HAS MARKINGS: "UP" AND "FWD" ON 2 LINES NEAR CENTER TOP AND PART NUMBER NEAR CENTER BOTTOM IN |
| WIDTH | 16.360 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.