160D950827-229: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 16.600 INCHES NOMINAL IN, length: 20.940 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 2.500 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-5573, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 16.600 INCHES NOMINAL IN |
| length | 20.940 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 2.500 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-5573 |
| LENGTH | 20.940 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | RECTANGULAR WITH 2 CUTOUTS ON BOTTOM/LONG EDGE: 1.80WX3.00H AT RIGHT CORNER & 4.20WX4.60H AT LEFT CORNER; LEFT EDGE HAS CUTOUT: 1.26WX1.40H, 2.20 FROM TOP; TOP EDGE HAS 2 CUTOUTS: RECTANGLE, 3.50WX5.75H, 3.50 FROM RIGHT EDGE & HALF-ARCH, 2.00W EXTENDING TO RIGHT OF LINE 3.50 FROM RIGHT EDGE, ENDING IN ARC WITH 1.00 INCH RADIUS, CENTERED 3.00 FROM RIGHT EDGE & 7.00 FROM TOP; NEAR SIDE HAS GROOVE ALONG TOP EDGE: 2.20WX1.50D; FAR SIDE TAPERS 0.30 AT BOTTOM EDGE & IS MARKED: "UP" & "AFT" ON 2 LINES BELOW TOP GROOVE, IN RIGHT CORNER (FAR SIDE UP) & WITH PART NUMBER CENTERED NEAR BOTTOM EDGE W |
| WIDTH | 16.600 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.