160D950827-221: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 18.160 INCHES NOMINAL IN, length: 20.940 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 4.000 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-5155, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 18.160 INCHES NOMINAL IN |
| length | 20.940 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 4.000 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-5155 |
| LENGTH | 20.940 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | RECTANGULAR WITH 2 CUTOUTS ON RIGHT/SHORT EDGE: 1.40WX2.40H AT TOP CORNER & 1.40WX2.24H AT BOTTOM CORNER; 2 CUTOUTS ON LEFT EDGE: 1.26WX1.60H, 2.24 FROM BOTTOM & 3.00WX3.70H AT TOP CORNER; TOP EDGE HAS CUTOUT 2.62WX3.70H, 4.10 FROM RIGHT; NEAR SIDE HAS LENGTHWISE GROOVES: 3.70WX2.20D ALONG TOP EDGE & 2.12WX0.68D ALONG BOTTOM EDGE & CROSSWISE GROOVE: 1.40WX2.68D ALONG RIGHT EDGE; FAR SIDE HAS LENGTHWISE GROOVES: (FAR SIDE UP) 2.40WX0.68D ALONG TOP EDGE & 2.24WX1.00D ALONG BOTTOM EDGE & CUTOUT: 4.14WX6.32LX2.00D AT RIGHT BOTTOM CORNER & IS MARKED "UP" & "AFT" IN UPPER GROOVE & WITH PART NUMBER ABOVE LOWER GROOVE |
| WIDTH | 18.160 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.