160D950827-215: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 17.280 INCHES NOMINAL IN, length: 20.940 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 4.000 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-4986, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 17.280 INCHES NOMINAL IN |
| length | 20.940 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 4.000 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-4986 |
| LENGTH | 20.940 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | RECTANGULAR WITH 3 CUTOUTS ON LEFT/SHORT EDGE: 1.26WX1.24H, 2.16 FROM BOTTOM & 3.30WX4.86H, 5.00 FROM BOTTOM & 4.90WX3.50H, 9.10 FROM BOTTOM; 2 CUTOUTS ON RIGHT EDGE: 2.40WX3.50H, 9.10 FROM BOTTOM & 4.90WX3.50HX1.08D, 9.10 FROM BOTTOM; TOP EDGE TAPERS 0.40 FROM FAR TO NEAR SURFACES; FAR SIDE HAS CROSSWISE GROOVES: 2.32WX1.50D ALONG TOP EDGE & 2.15WX2.36D ALONG BOTTOM ONE & LENGTHWISE U-SHAPED GROOVE BEGINNING 3.60 FROM LEFT EDGE & 2.32 FROM TOP EDGE AT SURFACE (FAR SIDE UP), DOWN & TO RIGHT TO 5.60 FROM LEFT & 1.50 FROM SURFACEM HORIZONTAL TO RIGHT 4.00 INCHES, UP TO 11.60 FRO LEFT, 1.50 FROM SURFACE, THEN RIGHT 4.06 THEN PERPENDICULARLY UP 1.50 INCHES THEN RIGHT TO EDGE; FAR SIDE IS MARKED "UP" & "AFT" NEAR CENTER TOP & WITH PART NUMBER AT CENTER BOTTOM IN |
| WIDTH | 17.280 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.