160D950827-135: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 15.400 INCHES NOMINAL IN, length: 23.400 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 4.000 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-5635, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 15.400 INCHES NOMINAL IN |
| length | 23.400 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 4.000 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-5635 |
| LENGTH | 23.400 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | RECTANGULAR WITH 2 CUTOUTS ON LEFT/SHORT EDGE: 1.25WX1.34H, 2.16 INCHES FROM BOTTOM & 1.25WX1.16H, 2.20 FROM TOP; A CUTOUT ON BOTTOM EDGE: 7.56WX0.32H, 6.80 INCHES FROM LEFT EDGE; A CIRCULAR PUNCHOUT WITH 5.00 DIAMETER, CENTERED 9.04 FROM LEFT & 6.70 FROM BOTTOM WITH LINE CUT THRU FROM CENTER OF CIRCLE TO LEFT EDGE; NEAR SIDE HAS LENGTHWISE GROOVE: 2.20WX1.36D ALONG TOP EDGE & IS MARKED: "UP" & "FWD" ON 2 LINES IN UPPER RIGHT AREA BELOW GROOVE & WITH PART NUMBER IN LOWER RIGHT CORNER; FAR SIDE HAS LENGTHWISE GROOVE: 2.16WX1.60D ALONG BOTTOM EDGE & SEMICIRCULAR LENGTHWISE GROOVE WITH 2.00 RADIUS CENTERED 7.00 FROM BOTTOM & EXTENDING FROM LEFT EDGE TO RIGHT, 9.04 INCHES IN |
| WIDTH | 15.400 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |