160D950827-119: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 18.200 INCHES NOMINAL IN, length: 23.400 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 4.000 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-2741, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 18.200 INCHES NOMINAL IN |
| length | 23.400 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 4.000 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-2741 |
| LENGTH | 23.400 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | RECTANGLE; 2 CUTOUTS ON LEFT/SHORT EDGE: 1.25WX1.54H, 2.00 FROM BOTTOM & 1.25WX2.12H, 2.00 FROM TOP & CUTOUT ON TOP EDGE: 3.80WX2.00H, 2.03 FROM RIGHT; NEAR SIDE IS TAPERED 0.32 AT TOP EDGE AND HAS LENGTHWISE GROOVES: 2.00HX0.60D ALONG BOTTOM EDGE & 2.60WX0.70D ALONG TOP & CROSSWISE GROOVE: 3.80WX3.00H, 2.04 FROM RIGHT EDGE; A NEARLY OVAL CUTOUT WITH RADIUS OF 2.00 CENTERED 13.09 FROM LEFT WITH LOWER ARC CENTERED 8.48 FROM BOTTOM, JUTTING TO LEFT FOR 1.00 INCH 8.48 FROM BOTTOM, THEN UP TO BOTTOM OF NEAR SIDE GROOVE, RIGHT ALONG GROOVE FOR 3.00 IN. THEN DOWN 1.76 TO MEET TOP OF UPPER ARC, CENTERED 11.84 FROM BOTTOM, ENDING WITH RIGHT SIDE OF OVAL; FAR SIDE IS TAPERED 0.20 AT BOTTOM EDGE AND HAS MARKINGS: "UP" & "AFT" BELOW GROOVE IN UPPER LEFT AREA DN PART NUMBER IN UPPER RIGHT AREA (FAR SIDE UP) IN |
| WIDTH | 18.200 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.