160D950827-117: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 17.750 INCHES NOMINAL IN, length: 23.400 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 2.500 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-2871, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 17.750 INCHES NOMINAL IN |
| length | 23.400 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 2.500 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-2871 |
| LENGTH | 23.400 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | RECTANGLE; 3 CUTOUTS ON LEFT/SHORT EDGE: 1.25WX1.18H, 2.12 FROM BOTTOM, 1.25WX1.00H, 5.96 FROM BOTTOM & 1.25WX1.76H, 2.03 FROM TOP; A TRAPEZOIDAL CUTOUT WITH BASE ON FAR SIDE: 5.48WX4.50H, 9.96 FROM BOTTOM & 15.00 FROM LEFT EDGE & TOP/NEAR SIDE: 10.08WX4.05H, 8.76 FROM BOTTOM & 3.52 FROM LEFT EDGE WITH CIRCULAR CUTOUT AT BOTTOM RIGHT CORNER WITH RADIUS OF 4.00 INCHES, CENTERED 13.09 FROM LEFT AND 8.64 FROM BOTTOM; NEAR SIDE IS TAPERED 0.28 AT TOP EDGE; FAR SIDE HAS LENGTHWISE GROOVES: 2.12WX0.80D ALONG BOTTOM EDGE & 2.03WX0.64 ALONG TOP & MARKINGS: "UP" & "AFT" TO LEFT OF CENTER CUTOUT (FAR SIDE UP) AND PART NUMBER IN UPPER RIGHT CORNER IN |
| WIDTH | 17.750 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.