160D950825-95: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 15.400 INCHES NOMINAL IN, length: 18.940 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 7.150 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-3455, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 15.400 INCHES NOMINAL IN |
| length | 18.940 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 7.150 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-3455 |
| LENGTH | 18.940 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | IRREGULARLY SHAPED - SEE DRAWING FOR DETAILS; SOMEWHAT MUSHROOM-SHAPED VIEWED FROM LONG EDGE & RECTANGULAR FROM TOP WITH ARCHED CUTOUT ALONG RIGHT/LONG EDGE: RADIUS OF 3.125, 9.31 FROM TOP EDGE; LEFT EDGE HAS CUTOUT 3.18 FROM FAR SURFACE, 1.62W THEN SLANTING UP & TO THE RIGHT AT 30 DEGREE ANGLE TO NEAR SURFACE; TOP SURFACE IS ROUNDED CROSSWISE WITH RADIUS OF 26.62, ENDING 1.16 FROM TOP & BOTTOM EDGES WHICH ARE CUT OFF AT A SLANT TO DEPTH OF 3.18 FROM FAR SIDE THEN CUT BACK IN HORIZONTALLY TO WIDTH OF 14.40, THEN DOWN IN 45 DEGREE ANGLE TO OUTER EDGE; FAR SIDE IS MARKED ALONG LONG EDGE WITHOUT ARCH: "FWD" TO LEFT OF CENTER & PART NUMBER IN RIGHT CORNER W |
| WIDTH | 15.400 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.