160D950825-93: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 14.900 INCHES NOMINAL IN, length: 24.370 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 6.790 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-3669, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 14.900 INCHES NOMINAL IN |
| length | 24.370 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 6.790 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-3669 |
| LENGTH | 24.370 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | IRREGULARLY SHAPED WITH GRADUATED LENGTHWISE ANGLES - SEE DRAWING FOR DETAILS; FAR SIDE HAS CUTOUT THAT IS ROUGHLY TRIANGULAR FROM FAR SIDE SURFACE TO 0.50 FROM NEAR SURFACE & CUTOUT ON RIGHT EDGE, FROM 1.75 INCHES FROM RIGHT EDGE, 30 DEGREES UP TOWARD RIGHT EDGE; NEAR SIDE HAS GRADUATED CUTS FROM RIGHT EDGE AT 30 DEGREE CUT UP & LEFT, MEETING TOP SURFACE 4.68 INCHES FROM LEFT EDGE, THEN DOWN TO 0.50 FROM TOP SURFACE AT LEFT EDGE; FAR SIDE IS MARKED: "BOTTOM" LENGTHWISE IN LOWER RIGHT CORNER (FAR SIDE UP) & PART NUMBER NEAR THE LOWER CENTER EDGE IN |
| WIDTH | 14.900 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.