160D950825-87: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 16.090 INCHES NOMINAL IN, length: 24.370 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 6.790 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-3028, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 16.090 INCHES NOMINAL IN |
| length | 24.370 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 6.790 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-3028 |
| LENGTH | 24.370 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | IRREGULARLY SHAPED: SEE DRAWING FOR DETAILS; FAR SIDE HAS 30 DEGREE CUTOUT ALONG RIGHT/LONG EDGE (FAR SIDE UP) AND ROUGHLY TRIANGULAR CUTOUT ON LEFT EDGE,15 -30 DEGREES FROM TOP SURFACE TO BOTTOM SURFACE & IS MARKED ""FWD" LENGTHWISE ALONG LOWER RIGHT EDGE & "UP" & P/N LENGTHWISE ALONG UPPER LEFT EDGE; NEAR SIDE HAS LENGTHWISE CUTOUT STARTING AT BOTTOM 30 DEGREE CUT, SLANTING UP TO POINT 2.00 FROM BOTTOM & 15.84 FROM RIGHT, THEN TO POINT 3.45 UP & 11.65 FROM RIGHT, TO 0.50 FROM TOP & 9.71 FROM RT, TO TOP, 4.85 FROM RT, THEN TO 0.50 FROM TOP AT RIGHT EDGE; TOP SURFACE HAS GRADUATED LENGTHWISE ANGLES - SEE DRAWING; BOTTOM EDGE HAS 30 DEGREE CROSSWISE CUTOUT (O AT FAR SURFACE TO 30 AT TOP); THERE IS A V-SHAPED CUTOUT: 30 DEGREES TOWARD BOTTOM EDGE, 9.37 FROM BOTTOM & 30 DEGREES TOWARD TOP EDGE, 11.73 FROM BOTTOM |
| WIDTH | 16.090 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.