160D950825-81: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 16.210 INCHES NOMINAL IN, length: 33.710 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 6.710 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-3655, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 16.210 INCHES NOMINAL IN |
| length | 33.710 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 6.710 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-3655 |
| LENGTH | 33.710 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | TRAPEZOIDAL IN SHAPE WITH NEAR SURFACE ROUNDED WITH RADIUS OF 40.25 INCHES FROM TOP EDGE TO BOTTOM EDGE; 2 CUTOUTS ON RIGHT EDGE: 1.75WX0.75H, 2.37 & 8.90 INCHES FROM BOTTOM EDGE; RIGHT EDGE HAS CIRCULAR CUTOUT, CENTERED 6.20 INCHES FROM BOTTOM, ALONG FAR SURFACE, GOING LEFT 5.26 INCHES THEN DOWN AT 45 DEGREE ANGLE TO BOTTOM EDGE; LEFT EDGE HAS CIRCULAR CUTOUT CENTERED 4.60 FROM BOTTOM EDGE, GOING RIGHT 7.50 INCHES THEN UP AT 45 DEGREE ANGLE TO TOP EDGE; FAR SIDE IS MARKED: "FWD" IN UPPER LEFT CORNER (FAR SIDE UP) & "UP" & "INBD" ON 2 LINES IN UPPER RIGHT CORNER & WITH PART NUMBER IN LOWER RIGHT CORNER IN |
| WIDTH | 16.210 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.