160D950825-69: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 11.640 INCHES NOMINAL IN, length: 38.140 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 6.750 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-4056, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 11.640 INCHES NOMINAL IN |
| length | 38.140 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 6.750 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-4056 |
| LENGTH | 38.140 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | RECTANGULAR; FAR SIDE HAS LENTHWISE GROOVE ALONG TOP EDGE, 1.00D, TAPERING FROM 4.00W AT RIGHT EDGE (NEAR SIDE UP) TO 3.00 DEEP AT LEFT EDGE; AN ARCHED CUTOUT ALONG TOP SURFACE, 3.00W, 1.12 INCH FROM RIGHT EDGE, ENDING IN CIRCLE CENTERED 2.67 FROM RIGHT & 4.87 FROM TOP; A SEMICIRCULAR GROOVE ON FAR SURFACE WITH 1.48 RADIUS, CENTERED 23.81 FROM RIGHT EDGE AT TOP EDGE, ANGLING DOWN AND TO RIGHT THEN OVER TO RIGHT EDGE, ENDING 5.00 FROM TOP -SEE DRAWING FOR DETAILS; NEAR SIDE IS MARKED: "FWD" & "UP" ON 2 LINES IN UPPER LEFT CORNER & WITH PART NUMBER IN LOWER LEFT CORNER W |
| WIDTH | 11.640 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.