160D950825-61: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 17.710 INCHES NOMINAL IN, length: 38.140 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 4.000 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-3768, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 17.710 INCHES NOMINAL IN |
| length | 38.140 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 4.000 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-3768 |
| LENGTH | 38.140 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | RECTANGLE WITH CUTOUT FROM BOTTOM/LONG & LOWER RIGHT EDGES: RECTANGULAR CUTOUT , 30.44WX5.00H FROM RIGHT CORNER; SEMICIRCLE WITH 9.00 RADIUS, CENTERED 18.44 FROM RIGHT ON CUT EDGE; A SEMICIRCLE WITH 2.50 RADIUS, CENTERED 20.94 FROM RIGHT ON SAME CUT EDGE, OVERLAPPING FIST CIRCLE; BOTTOM LEFT EDGE IS CUT AT ANGLE TOWARD CUTOUTS (APPROXIMATELY 22 DEGREE ANGLE), THERE IS A GROOVE: 1.50WX1.75D ALONG THIS BOTTOM EDGE; NEAR SIDE IS MARKED: "FWD" & "UP" ON 2 LINES, CROSSWISE, NEAR CENTER OF LEFT EDGE & WITH PART NUMBER, LENGTHWISE, NEAR UPPER LEFT CORNER |
| WIDTH | 17.710 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.