160D950825-45: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 25.440 INCHES NOMINAL IN, length: 27.300 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 4.000 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-3754, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 25.440 INCHES NOMINAL IN |
| length | 27.300 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 4.000 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | AIRCRAFT, THUNDERBOLT II, A-10 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-3754 |
| LENGTH | 27.300 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | RECTANGLE WITH UPPER CORNERS CUT OFF AT 30 DEGREE ANGLE 17.00 INCHES FROM BOTTOM/SHORT EDGE & WITH OVAL CUTOUTS ON THESE CUTOFF EDGES WITH 2.50 RADII, WITH LOWER ARCS CENTERED 3.24 FROM OUTER EDGES (BEFORE CUTOFF) & 20.62 FROM BOTTOM EDGES EXTENDING UP ON CUTOFF EDGE 7.50 INCHES TO UPPER ARC; 4 MORE CUTOUTS: CIRCLE WITH 1.06 RADIUS CENTERED 4.17 FROM BOTTOM & 1.92 FROM RIGHT EDGE ALONG NEAR SURFACE & EXTENDING TO BOTTOM EDGE, A KIDNEY SHAPE WITH LOWER RADIUS OF 0.75, CENTERED 2.10 FROM RIGHT EDGE & 8.00 FROM BOTTOM & UPPER ARC WITH 1.75 RADIUS, CENTERED 2.72 FROM RIGHT & 10.50 FROM BOTTOM; NEARLY OVAL, WITH LOWER ARC WITH 1.50 RADIUS, 3.49 FROM LEFT EDGE & 6.31 FROMBOTTOM & UPPER ARC WITH 1.75 RAD,2.72 FROM LEFT & 10.50 FROM BOTTOM & BUMP WITH 1.00 RADIUS, CENTERED 1.92 FROM LEFT & 8.00 FROM BOTTOM, A 3 INCH TUBE EXTENDING FROM THIS CUTOUT TO THE RIGHT DOWNWARD TO FAR SURFACE THEN BACK UP TO TOP SURFACE AT BOTTOM EDGE, 10.12 FROM LEFT & 1.50 FROM TOP SURFACE IN |
| WIDTH | 25.440 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.