160D950825-19: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 18.500 INCHES NOMINAL IN, length: 21.340 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 4.000 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-4070, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 18.500 INCHES NOMINAL IN |
| length | 21.340 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 4.000 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | MISSILE, MINUTEMAN LGM-30 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-4070 |
| LENGTH | 21.340 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | RECTANGULAR WITH CUTOUT AT LOWER RIGHT CORNER, 4.60WX2.46H; A KIDNEY SHAPED CUTOUT WITH ONE END HAVING A 2.00 RADIUS, CENTERED 3.42 FROM LEFT EDGE & 10.25 FROM TOP & OTHER END WITH 3.50 RADIUS, CENTERED 8.42 FROM LEFT & 8.00 FROM TOP; A SEMICIRCULAR GROOVE ON FAR SIDE SURFACE WITH 1.50 RADIUS, 2.25 DEEP, CENTERED 3.22 FROM LEFT AT TOP EDGE (NEAR SIDE UP) & EXTENDING 11 DEGREES DOWN TO LEFT EDGE; A TRAPEZOIDAL GROOVE ON FAR SIDE SURFACE, 2.65 DEEP WITH ENDPOINTS 12.12 & 19.92 INCHES FROM LEFT AT TOP EDGE AND 15.37 & 19.92 FROM LEFT AT BOTTOM EDGE; NEAR SIDE IS MARKED "FWD UP" AT CENTER TOP & WITH PART NUMBER BELOW KIDNEY CUTOUT IN |
| WIDTH | 18.500 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | MISSILE, MINUTEMAN LGM-30 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.