160D950825-17: PLASTIC MATERIAL,CELLULAR.
The PLASTIC MATERIAL,CELLULAR is a the manufacturer industrial component. Key specifications include width: 18.500 INCHES NOMINAL IN, length: 25.440 INCHES NOMINAL IN, material: PLASTIC POLYURETHANE, thickness: 4.000 INCHES NOMINAL IN, density_rating: 1.2 POUNDS PER CUBIC FOOT LBS, surface_condition: ROUGH. This part is cataloged in the U.S.
Government catalog under NSN 9330-01-502-3941, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| width | 18.500 INCHES NOMINAL IN |
| length | 25.440 INCHES NOMINAL IN |
| material | PLASTIC POLYURETHANE |
| thickness | 4.000 INCHES NOMINAL IN |
| density_rating | 1.2 POUNDS PER CUBIC FOOT LBS |
| surface_condition | ROUGH |
| supplementary_features | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| end_item_identification | MISSILE, MINUTEMAN LGM-30 |
| fire_retarding_characteristic | NOT FIRE RETARDING |
| part_name_assigned_by_controlling_agency | FILLER FOAM |
| compression_strength_at_25_pct_deflection | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| NSN | 9330-01-502-3941 |
| LENGTH | 25.440 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
| SURFACE CONDITION | ROUGH |
| COMPRESSION STRENGTH AT 25 PCT DEFLECTION | 0.35 POUNDS PER SQUARE INCH (PSI) MINIMUM LBS |
| FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| SPECIAL FEATURES | RECTANGULAR WITH 2 CUTOUTS ON BOTTOM/LONG EDGE: 2.16WX2.25H AT BOTTOM RIGHT CORNER & 2.16WX1.75H AT BOTTOM LEFT; 2 CUTOUTS ON TOP EDGE: BEGINNING 9.32 FROM EITHER SIDE EDGE, DOWN 2.50 INCHES THEN DOWN & TOWARD SIDE, ENDING 3.50 FROM TOP EDGE; A KIDNEY SHAPED CUTOUT WITH LOWER ARC WITH 3.00 RADIUS CENTERED 7.72 FROM LEFT EDGE & 10.25 FROM TOP & UPPER ARC WITH 3.50 RADIUS CENTERED 12.72 FROM LEFT EDGE & 7.75 FROM TOP; FAR SIDE HAS 3.00 INCH DEEP GROOVE 2.42 INCHES FROM RIGHT (CUT) EDGE ACROSS TO THE RIGHT EDGE, EXTENDING DOWN 5.00 FROM TOP EDGE THEN SLANTING TOWARD RIGHT, ENDING AT THE RIGHT EDGE, 7.25 FROM TOP & AN ARCHED GROOVE BELOW THIS CUTOUT, 0.725 INCHES IN FROM RIGHT EDGE, 2.75WX3.00 DEEP; NEAR SIDE IS MARKED: "FWD UP" AT CENTER TOP & WITH PART NUMBER NEAR CENTER OF RIGHT EDGE IN |
| WIDTH | 18.500 INCHES NOMINAL IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| END ITEM IDENTIFICATION | MISSILE, MINUTEMAN LGM-30 |
| MATERIAL | PLASTIC POLYURETHANE |
No substitute or cross-reference records for this part.