160D121225-3 — BELL CRANK

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

160D121225-3: BELL CRANK.

The BELL CRANK is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, bore_length: 0.813 INCHES MINIMUM AND 0.823 INCHES MAXIMUM IN, bore_diameter: 0.873 INCHES MINIMUM AND 0.874 INCHES MAXIMUM IN, style_designator: CLEVIS ENDS, fsc_application_data: CONTROL INSTALLATION,FUSELAGE,AIRFRAME, end_hole/ball_diameter: 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM FIRST END IN. This part is cataloged in the U.S.

Government catalog under NSN 1680-01-010-2825, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

160D121225-3

NSN: 1680-01-010-2825
FSC: 1680 — Miscellaneous Aircraft Accessories and Components
CAGE: 79RG9 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY
bore_length	0.813 INCHES MINIMUM AND 0.823 INCHES MAXIMUM IN
bore_diameter	0.873 INCHES MINIMUM AND 0.874 INCHES MAXIMUM IN
style_designator	CLEVIS ENDS
fsc_application_data	CONTROL INSTALLATION,FUSELAGE,AIRFRAME
end_hole/ball_diameter	0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM FIRST END IN
center_to_center_distance_between_fulcrum_and_arm_end_hole/slot/ball	2.955 INCHES MINIMUM AND 2.965 INCHES MAXIMUM FIRST END IN
NSN	1680-01-010-2825

COMPONENT DIAGRAM

KEY FEATURES

•

CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL: 2.955 INCHES MINIMUM AND 2.965 INCHES MAXIMUM FIRST END IN

•

END HOLE/BALL DIAMETER: 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SECOND END IN

•

FSC APPLICATION DATA: CONTROL INSTALLATION,FUSELAGE,AIRFRAME

•

BORE LENGTH: 0.813 INCHES MINIMUM AND 0.823 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: CLEVIS ENDS

•

BORE DIAMETER: 0.873 INCHES MINIMUM AND 0.874 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL	2.955 INCHES MINIMUM AND 2.965 INCHES MAXIMUM FIRST END IN
CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL	4.745 INCHES MINIMUM AND 4.755 INCHES MAXIMUM SECOND END IN
END HOLE/BALL DIAMETER	0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SECOND END IN
END HOLE/BALL DIAMETER	0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM FIRST END IN
FSC APPLICATION DATA	CONTROL INSTALLATION,FUSELAGE,AIRFRAME
BORE LENGTH	0.813 INCHES MINIMUM AND 0.823 INCHES MAXIMUM IN
STYLE DESIGNATOR	CLEVIS ENDS
BORE DIAMETER	0.873 INCHES MINIMUM AND 0.874 INCHES MAXIMUM IN
MATERIAL	ALUMINUM ALLOY

OTHER ITEMS IN FSC 1680 — Miscellaneous Aircraft Accessories and Components

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

1680-00-000-0144 1680-00-001-1401 1680-00-001-1402 1680-00-001-1403 1680-00-001-1404 1680-00-001-1730 1680-00-001-1731 1680-00-001-1736

SUBSTITUTES & CROSS-REFERENCES 1

160D121225-1Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)

Ready to buy 160D121225-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 160D121225-3?

160D121225-3 is a BELL CRANK.

What parts can replace 160D121225-3?

There is 1 known substitute for 160D121225-3: 160D121225-1. Substitute compatibility should be verified for your specific system.

What is the NSN for 160D121225-3?

160D121225-3 is cataloged in the U.S. Government catalog under NSN 1680-01-010-2825. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

160D121225-3 — BELL CRANK

Request a Quote — 160D121225-3