PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 160934
160934 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 1.1250 INCHES NOMINAL IN, overall_width: 1.0000 INCHES NOMINAL IN, alignment_type: RIGID, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL, overall_outside_diameter: 1.3750 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-3106, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
160934
NSN: 3110-00-120-3106
FSC: 3110
CAGE: 1ML14 — BRINKLEY TECHNOLOGY GROUP LLC DBA HERCULES MANUFACTURING (USA)
SPECIFICATIONS
bore_diameter1.1250 INCHES NOMINAL IN
overall_width1.0000 INCHES NOMINAL IN
alignment_typeRIGID
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter1.3750 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-120-3106
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 160934 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
BORE DIAMETER: 1.1250 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 1.3750 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
BORE DIAMETER1.1250 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.3750 INCHES NOMINAL IN
OVERALL WIDTH1.0000 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
7333Interchangeable
interchangeable cross-reference
interchangeable
8736866Interchangeable
interchangeable cross-reference
interchangeable
M814Interchangeable
interchangeable cross-reference
interchangeable
8736867Interchangeable
interchangeable cross-reference
interchangeable
16092-1Interchangeable
interchangeable cross-reference
interchangeable
17879-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 160934?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 160934?
160934 is a BEARING,ROLLER,NEEDLE.
What parts can replace 160934?
There are 23 known substitutes for 160934: 7333, 8736866, M814 and 20 more. Substitute compatibility should be verified for your specific system.
Is 160934 still available?
160934 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 160934

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026