PartsTable
Technical Data Sheet
Download PDF

16087A — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

16087A: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, thickness: 0.094 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN, hole_diameter: 0.672 INCHES MINIMUM AND 0.703 INCHES MAXIMUM IN, overall_diameter: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-298-6364, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16087A
NSN: 5310-00-298-6364
FSC: 5310 — Nuts and Washers
CAGE: 06350 — ASSET SYSTEMS, INC. DBA ASSET SYSTEMS INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
thickness0.094 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
hole_diameter0.672 INCHES MINIMUM AND 0.703 INCHES MAXIMUM IN
overall_diameter0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-298-6364
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 16087A · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.672 INCHES MINIMUM AND 0.703 INCHES MAXIMUM IN
•
THICKNESS: 0.094 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALRUBBER SYNTHETIC OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.672 INCHES MINIMUM AND 0.703 INCHES MAXIMUM IN
THICKNESS0.094 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
20982Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
17236Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 16087A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16087A?
16087A is a WASHER,FLAT.
What parts can replace 16087A?
There are 2 known substitutes for 16087A: 20982, 17236. Substitute compatibility should be verified for your specific system.
What is the NSN for 16087A?
16087A is cataloged in the U.S. Government catalog under NSN 5310-00-298-6364. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16087A