PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 160536
160536 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, overall_width: 1.2500 INCHES NOMINAL IN, outside_diameter: 6.0000 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, backface_corner_radius: 0.1250 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-016-0536, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
160536
NSN: 5305-00-016-0536
FSC: 5305
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width1.2500 INCHES NOMINAL IN
outside_diameter6.0000 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
backface_corner_radius0.1250 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN5305-00-016-0536
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 160536 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: PAN
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
THREAD CLASS: 2A A
•
THREAD QUANTITY PER INCH: 20
•
THREAD LENGTH: 0.625 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEPAN
FASTENER LENGTH0.625 INCHES NOMINAL IN
THREAD CLASS2A A
THREAD QUANTITY PER INCH20
THREAD LENGTH0.625 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM OR ZINC
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 9C STYLE
SCREW MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
149541Interchangeable
interchangeable cross-reference
interchangeable
TB17BInterchangeable
interchangeable cross-reference
interchangeable
64AX73Interchangeable
interchangeable cross-reference
interchangeable
160536Interchangeable
interchangeable cross-reference
interchangeable
114354Interchangeable
interchangeable cross-reference
interchangeable
FFS92TYPE3STYLE9CInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 160536?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 160536?
160536 is a CUP,TAPERED ROLLER BEARING.
What parts can replace 160536?
There are 6 known substitutes for 160536: 149541, TB17B, 64AX73 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 160536?
160536 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-016-0536. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 160536

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026