PartsTable
Technical Data Sheet
1604-140 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ELECTRONIC MODULE,STANDARDIZED is a the manufacturer industrial component. Key specifications include material: PLASTIC, drive_type: SERRATED OR SCREW SLOT, design_type: THREADED, control_type: REMOTE, overall_width: 1.950 INCHES NOMINAL IN, inclosure_type: ENCASED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-6936, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1604-140
NSN: 5340-00-205-6936
FSC: 5340
CAGE: 97945 — PENNWALT CORP S S WHITE INDUSTRIAL PRODUCTS DIV (USA)
SPECIFICATIONS
materialPLASTIC
drive_typeSERRATED OR SCREW SLOT
design_typeTHREADED
control_typeREMOTE
overall_width1.950 INCHES NOMINAL IN
inclosure_typeENCASED
overall_height0.290 INCHES NOMINAL IN
overall_length2.620 INCHES NOMINAL IN
connection_typePLUG CONNECTOR BOTTOM
overall_diameter0.125 INCHES NOMINAL IN
special_featuresKEY CODE ULZ
special_markingsCAPACITOR-RESISTOR,HYBRID
NSN5340-00-205-6936
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1604-140 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
OVERALL DIAMETER: 0.125 INCHES NOMINAL IN
MATERIAL: PLASTIC
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 1/8-27 NPT
DRIVE TYPE: SERRATED OR SCREW SLOT
DESIGN TYPE: THREADED
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER0.125 INCHES NOMINAL IN
MATERIALPLASTIC
THREAD SIZE AND SERIES/TYPE DESIGNATOR1/8-27 NPT
DRIVE TYPESERRATED OR SCREW SLOT
DESIGN TYPETHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
P40Interchangeable
interchangeable cross-reference
interchangeable
S871Interchangeable
interchangeable cross-reference
interchangeable
A225910Interchangeable
interchangeable cross-reference
interchangeable
35413Interchangeable
interchangeable cross-reference
interchangeable
1088Interchangeable
interchangeable cross-reference
interchangeable
C0UB2295Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1604-140?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1604-140?
1604-140 is a ELECTRONIC MODULE,STANDARDIZED.
What parts can replace 1604-140?
There are 19 known substitutes for 1604-140: P40, S871, A225910 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1604-140?
1604-140 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-6936. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1604-140