PartsTable
Technical Data Sheet
Download PDF

1603AS323 — FASTENER,PAWL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1603AS323: FASTENER,PAWL.

The FASTENER,PAWL is a the manufacturer industrial component. Key specifications include width: 1.125 INCHES NOMINAL IN, height: 0.547 INCHES NOMINAL IN, length: 1.000 INCHES NOMINAL IN, material: STEEL OVERALL, pawl_type: STRAIGHT, special_features: HOLE QUANTITY:2. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-139-0327, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1603AS323
NSN: 5340-00-139-0327
FSC: 5340 — Hardware, Commercial
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
width1.125 INCHES NOMINAL IN
height0.547 INCHES NOMINAL IN
length1.000 INCHES NOMINAL IN
materialSTEEL OVERALL
pawl_typeSTRAIGHT
special_featuresHOLE QUANTITY:2
operational_directionRIGHT-HAND
pawl_actuation_methodGRIP HANDLE
center_to_center_distance_between_mounting_holes0.812 INCHES NOMINAL IN
pawl_length_from_actuating_shaft_center_to_pawl_end0.625 INCHES NOMINAL IN
NSN5340-00-139-0327
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1603AS323 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATIONAL DIRECTION: RIGHT-HAND
•
LENGTH: 1.000 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES: 0.812 INCHES NOMINAL IN
•
PAWL ACTUATION METHOD: GRIP HANDLE
•
PAWL TYPE: STRAIGHT
•
HEIGHT: 0.547 INCHES NOMINAL IN
•
WIDTH: 1.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OPERATIONAL DIRECTIONRIGHT-HAND
LENGTH1.000 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES0.812 INCHES NOMINAL IN
PAWL ACTUATION METHODGRIP HANDLE
PAWL TYPESTRAIGHT
HEIGHT0.547 INCHES NOMINAL IN
SPECIAL FEATURESHOLE QUANTITY:2
WIDTH1.125 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
PAWL LENGTH FROM ACTUATING SHAFT CENTER TO PAWL END0.625 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
320202Reference document
Same NSN cross-reference
Reference document — Secondary reference
43-1-16-0Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1603AS323?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1603AS323?
1603AS323 is a FASTENER,PAWL.
What parts can replace 1603AS323?
There are 2 known substitutes for 1603AS323: 320202, 43-1-16-0. Substitute compatibility should be verified for your specific system.
What is the NSN for 1603AS323?
1603AS323 is cataloged in the U.S. Government catalog under NSN 5340-00-139-0327. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1603AS323