PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1602DS
1602DS ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, overall_width: 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-159-9105, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1602DS
NSN: 3110-00-159-9105
FSC: 3110
CAGE: 43766 — SKF INDUSTRIES INC NICE BEARING PRODUCTS DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
overall_width0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter0.6870 INCHES MINIMUM AND 0.6875 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
NSN3110-00-159-9105
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1602DS · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
•
LOAD DIRECTION: RADIAL
•
BORE SHAPE: STRAIGHT
•
RETAINER FABRICATION METHOD: PRESSED
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
LUBRICATION MATERIALGREASE
INTERNAL FIT-UP DESIGNATIONSTANDARD
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
RETAINER FABRICATION METHODPRESSED
SHIELD QUANTITY2
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
9267Interchangeable
interchangeable cross-reference
interchangeable
24187Interchangeable
interchangeable cross-reference
interchangeable
9254Interchangeable
interchangeable cross-reference
interchangeable
D9267Interchangeable
interchangeable cross-reference
interchangeable
C-4BInterchangeable
interchangeable cross-reference
interchangeable
160C-4-BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1602DS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1602DS?
1602DS is a BEARING,BALL,ANNULAR.
What parts can replace 1602DS?
There are 7 known substitutes for 1602DS: 9267, 24187, 9254 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1602DS?
1602DS is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-159-9105. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1602DS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026