PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1602DCMILG18709
1602DCMILG18709 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 0.2470 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, overall_width: 0.3075 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-278-7392, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1602DCMILG18709
NSN: 3110-00-278-7392
FSC: 3110
CAGE: 43766 — SKF INDUSTRIES INC NICE BEARING PRODUCTS DIV (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter0.2470 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
overall_width0.3075 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
special_features0.0010 IN. INNER AND OUTER RING RADIAL RUNOUT IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
internal_clearance0.0015 INCHES NOMINAL RADIAL IN
lubrication_materialGREASE
NSN3110-00-278-7392
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1602DCMILG18709 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.2470 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC SEAL
•
INTERNAL CLEARANCE: 0.0015 INCHES NOMINAL RADIAL IN
•
LOAD DIRECTION: RADIAL
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
SEAL QUANTITY: 2
•
BEARING SEAL TYPE: CONTACT
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.2470 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC SEAL
INTERNAL CLEARANCE0.0015 INCHES NOMINAL RADIAL IN
LOAD DIRECTIONRADIAL
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
SEAL QUANTITY2
BEARING SEAL TYPECONTACT
RETAINER FABRICATION METHODPRESSED
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
17630Interchangeable
interchangeable cross-reference
interchangeable
12-426-01Interchangeable
interchangeable cross-reference
interchangeable
20-177039Interchangeable
interchangeable cross-reference
interchangeable
900003Interchangeable
interchangeable cross-reference
interchangeable
80-006Interchangeable
interchangeable cross-reference
interchangeable
B-052-025Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1602DCMILG18709?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1602DCMILG18709?
1602DCMILG18709 is a BEARING,BALL,ANNULAR.
What parts can replace 1602DCMILG18709?
There are 11 known substitutes for 1602DCMILG18709: 17630, 12-426-01, 20-177039 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1602DCMILG18709?
1602DCMILG18709 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-278-7392. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1602DCMILG18709

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026