PartsTable
Technical Data Sheet
Download PDF

16000-A-2 — FERRULE,GROOVED CLAMP COUPLING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

16000-A-2: FERRULE,GROOVED CLAMP COUPLING.

The FERRULE,GROOVED CLAMP COUPLING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6062 OVERALL, flange_length: 0.094 INCHES NOMINAL IN, overall_length: 0.312 INCHES NOMINAL IN, surface_treatment: ANODIZE OVERALL, ferrule_inside_diameter: 0.320 INCHES NOMINAL IN, flange_outside_diameter: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-139-6221, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16000-A-2
NSN: 5340-01-139-6221
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6062 OVERALL
flange_length0.094 INCHES NOMINAL IN
overall_length0.312 INCHES NOMINAL IN
surface_treatmentANODIZE OVERALL
ferrule_inside_diameter0.320 INCHES NOMINAL IN
flange_outside_diameter0.750 INCHES NOMINAL IN
material_document_and_classificationQQ-A-225/8 -T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/10 -T9 FED SPEC 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-139-6221
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 16000-A-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8 -T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/10 -T9 FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
FLANGE LENGTH: 0.094 INCHES NOMINAL IN
•
FERRULE INSIDE DIAMETER: 0.320 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
MATERIAL: ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6062 OVERALL
•
FLANGE OUTSIDE DIAMETER: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8 -T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/10 -T9 FED SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH0.312 INCHES NOMINAL IN
FLANGE LENGTH0.094 INCHES NOMINAL IN
FERRULE INSIDE DIAMETER0.320 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE OVERALL
MATERIALALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6062 OVERALL
FLANGE OUTSIDE DIAMETER0.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
16000-AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 16000-A-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16000-A-2?
16000-A-2 is a FERRULE,GROOVED CLAMP COUPLING.
What parts can replace 16000-A-2?
There is 1 known substitute for 16000-A-2: 16000-A. Substitute compatibility should be verified for your specific system.
What is the NSN for 16000-A-2?
16000-A-2 is cataloged in the U.S. Government catalog under NSN 5340-01-139-6221. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16000-A-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.