PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 160-942
160-942 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRUSH,CLEANING,SMALL ARMS is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE BRUSH PART, style_designator: SPIRAL ROUND, THREADED END, handling_facility_type: ROD, single_brush_overall_length: 6.000 INCHES NOMINAL IN, single_brush_length_of_brush_part: 2.000 INCHES NOMINAL IN, single_brush_diameter_of_brush_part: 0.550 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-587-0339, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
160-942
NSN: 5330-00-587-0339
FSC: 5330
CAGE: 25980 — GRACO INC. (USA)
SPECIFICATIONS
materialPLASTIC POLYHEXAMETHYLENE ADIPAMIDE BRUSH PART
style_designatorSPIRAL ROUND, THREADED END
handling_facility_typeROD
single_brush_overall_length6.000 INCHES NOMINAL IN
single_brush_length_of_brush_part2.000 INCHES NOMINAL IN
single_brush_diameter_of_brush_part0.550 INCHES NOMINAL IN
NSN5330-00-587-0339
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 160-942 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COLOR: BLACK
•
CENTER HOLE DIAMETER: 0.747 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 1.053 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
CROSS-SECTIONAL HEIGHT: 0.187 INCHES NOMINAL IN
•
MATERIAL: PLASTIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
COLORBLACK
CENTER HOLE DIAMETER0.747 INCHES NOMINAL IN
PERIPHERAL DIAMETER1.053 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CROSS-SECTIONAL HEIGHT0.187 INCHES NOMINAL IN
MATERIALPLASTIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
160942Interchangeable
interchangeable cross-reference
interchangeable
81-160Interchangeable
interchangeable cross-reference
interchangeable
807-58-0001-B-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 160-942?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 160-942?
160-942 is a BRUSH,CLEANING,SMALL ARMS.
What parts can replace 160-942?
There are 3 known substitutes for 160-942: 160942, 81-160, 807-58-0001-B-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 160-942?
160-942 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-587-0339. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 160-942

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026