PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 160-48
160-48 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include filter: NOT INCLUDED, radius: 2.500 INCHES NOMINAL IN, material: BRASS SEAT, body_style: STRAIGHT THRU, pattern_type: AMERICAN, face_cut_type: DOUBLE CUT, BASTARD. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-054-1409, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
160-48
NSN: 5340-00-054-1409
FSC: 5340
CAGE: 10695 — TAYLOR-DUNN CORPORATION DBA METRO CROWN INTERNATIONAL (USA)
SPECIFICATIONS
filterNOT INCLUDED
radius2.500 INCHES NOMINAL IN
materialBRASS SEAT
body_styleSTRAIGHT THRU
pattern_typeAMERICAN
face_cut_typeDOUBLE CUT, BASTARD
overall_length8.000 INCHES NOMINAL IN
connection_typeTHREADED EXTERNAL PIPE FIRST END
inside_diameter0.375 INCHES NOMINAL IN
regulation_typeAUTOMATIC SINGLE STAGE
connection_stylePLAIN FIRST END
largest_diameter0.312 INCHES IN
NSN5340-00-054-1409
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 160-48 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CONCAVE
•
MATERIAL: STEEL
•
RADIUS: 2.500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633, COMP FS1010-CANCELLED FED SPEC SINGLE MATERIAL RESPONSE
•
OUTSIDE DIAMETER: 1.688 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.083 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCONCAVE
MATERIALSTEEL
RADIUS2.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633, COMP FS1010-CANCELLED FED SPEC SINGLE MATERIAL RESPONSE
OUTSIDE DIAMETER1.688 INCHES NOMINAL IN
MATERIAL THICKNESS0.083 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
MIL-H-6000Interchangeable
interchangeable cross-reference
interchangeable
160-48Interchangeable
interchangeable cross-reference
interchangeable
M6000-48-01000Interchangeable
interchangeable cross-reference
interchangeable
28459Interchangeable
interchangeable cross-reference
interchangeable
02261-0158-46Interchangeable
interchangeable cross-reference
interchangeable
62X1348-B0Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 160-48?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 160-48?
160-48 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What parts can replace 160-48?
There are 13 known substitutes for 160-48: MIL-H-6000, 160-48, M6000-48-01000 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 160-48?
160-48 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-054-1409. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 160-48

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026