PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 16-444
16-444 ✓ Verified by PartsTable
Legrand · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

FILTER ELEMENT,INTAKE AIR CLEANE. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, blade_type: OSCILLATING, head_style: FILLISTER, blade_width: 12.5 MILLIMETERS MINIMUM AND 19.0 MILLIMETERS MAXIMUM MM, head_height: 0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-052-5062, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16-444
NSN: 5330-00-052-5062
FSC: 5330
CAGE: 64104 — DRESSER, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
blade_typeOSCILLATING
head_styleFILLISTER
blade_width12.5 MILLIMETERS MINIMUM AND 19.0 MILLIMETERS MAXIMUM MM
head_height0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
blade_length90.0 MILLIMETERS NOMINAL MM
thread_class2A A
coil_quantity4-3/4
head_diameter0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
hole_diameter0.437 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.312 INCHES NOMINAL IN
NSN5330-00-052-5062
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 16-444 MFR: Legrand ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE QUANTITY: 2
•
SIDE RADIUS FROM GASKET CENTER: 1.562 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803 F224000-2S9 MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: CORK AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
•
APERTURE DIAMETER: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT HOLE QUANTITY2
SIDE RADIUS FROM GASKET CENTER1.562 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803 F224000-2S9 MIL SPEC ALL MATERIAL RESPONSES OVERALL
MATERIALCORK AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
APERTURE DIAMETER2.000 INCHES NOMINAL IN
OVERALL WIDTH4.312 INCHES NOMINAL IN
HOLE DIAMETER0.437 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MAXIMUM PRESSURE RATING400.0 POUNDS PER SQUARE INCH (PSI) LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
6685PL1784741Interchangeable
interchangeable cross-reference
interchangeable
138005-P845FFInterchangeable
interchangeable cross-reference
interchangeable
10161Interchangeable
interchangeable cross-reference
interchangeable
860135Interchangeable
interchangeable cross-reference
interchangeable
1138685Interchangeable
interchangeable cross-reference
interchangeable
F23A18Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16-444?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16-444?
16-444 is a FILTER ELEMENT,INTAKE AIR CLEANE manufactured by Legrand.
What parts can replace 16-444?
There are 14 known substitutes for 16-444: 6685PL1784741, 138005-P845FF, 10161 and 11 more. Substitute compatibility should be verified for your specific system.
Is 16-444 still available?
16-444 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16-444

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026