PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 16-226
16-226 ✓ Verified by PartsTable
Legrand · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Premium quality is achieved by using appropriate thick cardboard, a special non-reflective layer, and puzzle pieces’ perfect fitting. Key specifications include width: 0.250 INCHES NOMINAL IN, height: 0.175 INCHES NOMINAL IN, length: 0.250 INCHES NOMINAL IN, material: STEEL MOUNTING, case_style: SQUARE, seal_width: 0.969 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-4006, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16-226
NSN: 5330-00-292-4006
FSC: 5330
CAGE: 82005 — ALLARD NAZARIAN GROUP, INC. DBA GRANITE STATE MANUFACTURING (USA)
SPECIFICATIONS
width0.250 INCHES NOMINAL IN
height0.175 INCHES NOMINAL IN
length0.250 INCHES NOMINAL IN
materialSTEEL MOUNTING
case_styleSQUARE
seal_width0.969 INCHES NOMINAL IN
body_length1.281 INCHES NOMINAL IN
terminal_typeWIRE LEAD
turn_quantity10 SINGLE COMPONENT SINGLE WINDING
coil_form_typeHOLLOW SINGLE COMPONENT
inclosure_typeFULLY INCLOSED
overall_length65.0 MILLIMETERS NOMINAL MM
NSN5330-00-292-4006
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 16-226 MFR: Legrand ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.969 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT A
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 4.999 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM CASE
•
ACCOMMODATED SHAFT DIAMETER: 3.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.969 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1000 FEET PER MINUTE FT
CASE STYLESQUARE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
HOUSING BORE DIAMETER4.999 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM CASE
ACCOMMODATED SHAFT DIAMETER3.188 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
16226Interchangeable
interchangeable cross-reference
interchangeable
763-1652-001Interchangeable
interchangeable cross-reference
interchangeable
SMB567920Interchangeable
interchangeable cross-reference
interchangeable
23062-0001Interchangeable
interchangeable cross-reference
interchangeable
716-091319Interchangeable
interchangeable cross-reference
interchangeable
CRM36-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16-226?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16-226?
16-226 is a COIL,RADIO FREQUENCY manufactured by Legrand.
What parts can replace 16-226?
There are 16 known substitutes for 16-226: 16226, 763-1652-001, SMB567920 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 16-226?
16-226 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-4006. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16-226

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026