PartsTable
Technical Data Sheet
PartsTable / MRO / 16-0564

16-0564 — Technical Data Sheet

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The STIFFENER,TELETYPEWRITER is a the manufacturer industrial component. Key specifications include FSC APPLICATION DATA: TELETYPE AND FACSIMILE EQUIPMENT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-016-0564, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 16-0564
NSN: 5305-00-016-0564
FSC: 5305
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
FSC APPLICATION DATATELETYPE AND FACSIMILE EQUIPMENT
NSN5305-00-016-0564
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 16-0564 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: PAN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC ALL MATERIAL RESPONSES
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 20
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
•
FASTENER LENGTH: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEPAN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC ALL MATERIAL RESPONSES
THREAD DIRECTIONRIGHT-HAND
HEAD HEIGHT0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH20
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SCREW MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
FASTENER LENGTH1.250 INCHES NOMINAL IN
SCREW SURFACE TREATMENTCADMIUM OR ZINC
HEAD DIAMETER0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
MDS 16-0564Interchangeable
interchangeable cross-reference
interchangeable
111 410Interchangeable
interchangeable cross-reference
interchangeable
FFS92TYPE3STYLE9CInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16-0564?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16-0564?
16-0564 is a STIFFENER,TELETYPEWRITER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 16-0564?
There are 3 known substitutes for 16-0564: MDS 16-0564, 111 410, FFS92TYPE3STYLE9C. Substitute compatibility should be verified for your specific system.
What is the NSN for 16-0564?
16-0564 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-016-0564. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16-0564

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026