PartsTable
Technical Data Sheet
Download PDF

15C7989-68 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

15C7989-68: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thread_class: 2A A, thread_length: 0.875 INCHES NOMINAL IN, fastener_length: 1.250 INCHES NOMINAL IN, special_features: HEAT TREAT SCREW SHALL BE EMBRITTLEMENT RELIEVED AT 190 DEGREES CELSIUS MINIMUM FOR NOT LESS THAN 3 HOURS, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-469-6205, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15C7989-68
NSN: 5305-01-469-6205
FSC: 5305 — Screws
CAGE: 58417 — SUNDSTRAND CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thread_class2A A
thread_length0.875 INCHES NOMINAL IN
fastener_length1.250 INCHES NOMINAL IN
special_featuresHEAT TREAT SCREW SHALL BE EMBRITTLEMENT RELIEVED AT 190 DEGREES CELSIUS MINIMUM FOR NOT LESS THAN 3 HOURS
thread_directionRIGHT-HAND
nominal_thread_diameter0.164 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-469-6205
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 15C7989-68 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.875 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 2A A
•
THREAD QUANTITY PER INCH: 32
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.250 INCHES NOMINAL IN
THREAD LENGTH0.875 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
THREAD DIRECTIONRIGHT-HAND
SPECIAL FEATURESHEAT TREAT SCREW SHALL BE EMBRITTLEMENT RELIEVED AT 190 DEGREES CELSIUS MINIMUM FOR NOT LESS THAN 3 HOURS
THREAD CLASS2A A
THREAD QUANTITY PER INCH32
MATERIALSTEEL OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 15C7989-68?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15C7989-68?
15C7989-68 is a SCREW,CAP,SOCKET HEAD.
What is the NSN for 15C7989-68?
15C7989-68 is cataloged in the U.S. Government catalog under NSN 5305-01-469-6205. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15C7989-68