The RUBBER ROUND SECTION is a the manufacturer industrial component. Key specifications include length: 319.500 INCHES MINIMUM AND 320.500 INCHES MAXIMUM IN, material: RUBBER SILICONE CLASS Q LOCATION NOT OTHERWISE SPECIFIED, temp_rating: -80.0 FAHRENHEIT AND 425.0 FAHRENHEIT DEGF, surface_condition: SMOOTH BOTH SIDES, cross-sectional_shape_style: CIRCULAR, nonmetallic_hardness_rating: 35.0 MINIMUM SHORE DUROMETER A AND 45.0 MAXIMUM SHORE DUROMETER A. This part is cataloged in the U.S.
Government catalog under NSN 5330-01-321-8403, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
1596AS238
NSN:5330-01-321-8403 FSC:5330 — Packing and Gasket Materials CAGE:30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
length
319.500 INCHES MINIMUM AND 320.500 INCHES MAXIMUM IN
material
RUBBER SILICONE CLASS Q LOCATION NOT OTHERWISE SPECIFIED
temp_rating
-80.0 FAHRENHEIT AND 425.0 FAHRENHEIT DEGF
surface_condition
SMOOTH BOTH SIDES
cross-sectional_shape_style
CIRCULAR
nonmetallic_hardness_rating
35.0 MINIMUM SHORE DUROMETER A AND 45.0 MAXIMUM SHORE DUROMETER A
cross_section_outside_diameter
0.441 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
material_document_and_classification
ZZ-R-765, CLASS 2B, GRADE 40 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
NSN
5330-01-321-8403
COMPONENT DIAGRAM
KEY FEATURES
•
TEMP RATING: -80.0 FAHRENHEIT AND 425.0 FAHRENHEIT DEGF
•
LENGTH: 319.500 INCHES MINIMUM AND 320.500 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ZZ-R-765, CLASS 2B, GRADE 40 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
•
SURFACE CONDITION: SMOOTH BOTH SIDES
•
CROSS-SECTIONAL SHAPE STYLE: CIRCULAR
•
CROSS SECTION OUTSIDE DIAMETER: 0.441 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q LOCATION NOT OTHERWISE SPECIFIED
TECHNICAL CHARACTERISTICS
TEMP RATING
-80.0 FAHRENHEIT AND 425.0 FAHRENHEIT DEGF
LENGTH
319.500 INCHES MINIMUM AND 320.500 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
ZZ-R-765, CLASS 2B, GRADE 40 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
SURFACE CONDITION
SMOOTH BOTH SIDES
CROSS-SECTIONAL SHAPE STYLE
CIRCULAR
SPECIAL FEATURES
GASKET CROSS SCCTION SHALL BE CONTINUOUS AT SEAM NO MORE THAN ONE SEAM IS PERMISSIBLE; JOINED SEAM TENSILE STRENGTH AND ULTIMATE ELONGATION BEFORE AND AFTER OVEN AGING SHALL BE NOT LESS THAN 80 PERCENT OF THE REQUIREMENTS SPECIFIED ON ZZ-R-765 AND TESTED PER FED-STD-601,METHOD 4311
CROSS SECTION OUTSIDE DIAMETER
0.441 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
MATERIAL
RUBBER SILICONE CLASS Q LOCATION NOT OTHERWISE SPECIFIED
NONMETALLIC HARDNESS RATING
35.0 MINIMUM SHORE DUROMETER A AND 45.0 MAXIMUM SHORE DUROMETER A
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1596AS238?
1596AS238 is a RUBBER ROUND SECTION.
What parts can replace 1596AS238?
There is 1 known substitute for 1596AS238: ZZ-R-765 CL2B G R40. Substitute compatibility should be verified for your specific system.
What is the NSN for 1596AS238?
1596AS238 is cataloged in the U.S. Government catalog under NSN 5330-01-321-8403. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.