PartsTable / O-RING / 15936PC5
15936PC5
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, center_hole_diameter: 1.789 INCHES MINIMUM AND 1.809 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-542-1609, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
15936PC5
NSN: 5331-00-542-1609 FSC: 5331 — O-RINGCAGE: 07270 — MOOG INC. DBA AMPAC-ISP CORP (USA)
SPECIFICATIONS
material RUBBER FLUOROCARBON CLASS FPM center_hole_diameter 1.789 INCHES MINIMUM AND 1.809 INCHES MAXIMUM IN cross-sectional_height 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN NSN 5331-00-542-1609
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 15936PC5
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CENTER HOLE DIAMETER: 1.789 INCHES MINIMUM AND 1.809 INCHES MAXIMUM IN
• MATERIAL: RUBBER FLUOROCARBON CLASS FPM
• CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER 1.789 INCHES MINIMUM AND 1.809 INCHES MAXIMUM IN MATERIAL RUBBER FLUOROCARBON CLASS FPM CROSS-SECTIONAL HEIGHT 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
15922 Interchangeable interchangeable cross-reference
interchangeable
140-121 Interchangeable interchangeable cross-reference
interchangeable
651590 Interchangeable interchangeable cross-reference
interchangeable
5961PL0960995 Interchangeable interchangeable cross-reference
interchangeable
330-1205 Interchangeable interchangeable cross-reference
interchangeable
80-550474 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 15936PC5?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15936PC5?
15936PC5 is a O-RING.
What parts can replace 15936PC5?
There are 19 known substitutes for 15936PC5: 15922, 140-121, 651590 and 16 more. Substitute compatibility should be verified for your specific system.
Is 15936PC5 still available?
15936PC5 is currently cancelled.
Request a Quote — 15936PC5