PartsTable
Technical Data Sheet
PartsTable / MRO / 15901-6
15901-6 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include material: GLASS CASE, body_style: TUBE TYPE, bore_diameter: 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN, overall_width: 1.2550 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM IN, alignment_type: RIGID, overall_length: 1.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-3210, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 15901-6
NSN: 3110-00-227-3210
FSC: 3110
CAGE: 29899 — CALGON CARBON UV TECHNOLOGIES LLC DBA HYDE MARINE (USA)
SPECIFICATIONS
materialGLASS CASE
body_styleTUBE TYPE
bore_diameter0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
overall_width1.2550 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM IN
alignment_typeRIGID
overall_length1.250 INCHES NOMINAL IN
surface_finishGROUND
overall_diameter0.250 INCHES NOMINAL IN
special_featuresOIL HOLE AND OIL GROOVE IN OUTER RING,OIL HOLE AND OIL GROOVE IN INNER RING,MFR STD RETAINER
style_designatorSEPARABLE INNER RACE, WITH ROLLER RETAINER, HARDENED AND GROUND
features_providedNONRENEWABLE FUSIBLE ELEMENT
surface_treatmentNICKEL TERMINAL
NSN3110-00-227-3210
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 15901-6 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 1.7495 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
•
BORE DIAMETER: 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SEPARABLE INNER RACE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESOIL HOLE AND OIL GROOVE IN OUTER RING,OIL HOLE AND OIL GROOVE IN INNER RING,MFR STD RETAINER
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER1.7495 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
BORE DIAMETER0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
STYLE DESIGNATORSEPARABLE INNER RACE, WITH ROLLER RETAINER, HARDENED AND GROUND
MATERIALSTEEL OVERALL
OVERALL WIDTH1.2550 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
509110Interchangeable
interchangeable cross-reference
interchangeable
5905001048363Interchangeable
interchangeable cross-reference
interchangeable
R25820JInterchangeable
interchangeable cross-reference
interchangeable
20-2820Interchangeable
interchangeable cross-reference
interchangeable
7235Interchangeable
interchangeable cross-reference
interchangeable
NB1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15901-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15901-6?
15901-6 is a RESISTOR,FIXED,COMPOSITION. It is classified as a MRO (MRO_GENERAL).
What parts can replace 15901-6?
There are 25 known substitutes for 15901-6: 509110, 5905001048363, R25820J and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 15901-6?
15901-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-3210. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15901-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026