PartsTable
Technical Data Sheet
PartsTable / MRO / 15839
15839 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,METALLIZED,PAPER. Key specifications include shape: BAYONET, body_width: 2.125 INCHES NOMINAL IN, body_height: 2.500 INCHES NOMINAL IN, body_length: 1.875 INCHES NOMINAL IN, rating_method: ELECTRICAL SINGLE COMPONENT SINGLE WINDING, inclosure_type: HERMETICALLY SEALED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-056-4772, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 15839
NSN: 5330-00-056-4772
FSC: 5330
CAGE: 33654 — HOWDEN FLUID SYSTEMS (USA)
SPECIFICATIONS
shapeBAYONET
body_width2.125 INCHES NOMINAL IN
body_height2.500 INCHES NOMINAL IN
body_length1.875 INCHES NOMINAL IN
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
inclosure_typeHERMETICALLY SEALED
overall_length9.000 INCHES NOMINAL IN
inductance_typeFIXED
mounting_methodUNTHREADED HOLE(S) SINGLE GROUP
special_featuresBIPOLAR FORCEPS, BAYONET, IRRIGATING AND NON-INSULATED; MATERIAL: TITANIUM; WORKING LENGTH: 3.750 IN; TIP WIDTH: 0.30 MM MM
winding_quantity1 SINGLE COMPONENT
inductance_rating10.00 HENRY NOMINAL SINGLE COMPONENT SINGLE WINDING
NSN5330-00-056-4772
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 15839 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEST DATA DOCUMENT: 18876-9167664-32 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATION1430-01-042-4208
TEST DATA DOCUMENT18876-9167664-32 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
15839Interchangeable
interchangeable cross-reference
interchangeable
22887Interchangeable
interchangeable cross-reference
interchangeable
120525006Interchangeable
interchangeable cross-reference
interchangeable
6515NCM104267Interchangeable
interchangeable cross-reference
interchangeable
80-2909Interchangeable
interchangeable cross-reference
interchangeable
9167664-32Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15839?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15839?
15839 is a CAPACITOR,FIXED,METALLIZED,PAPER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 15839?
There are 6 known substitutes for 15839: 15839, 22887, 120525006 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 15839?
15839 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-056-4772. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15839

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026