PartsTable
Technical Data Sheet
Download PDF

15834NICKEL — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

15834NICKEL: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include width: 0.625 INCHES NOMINAL IN, height: 0.218 INCHES NOMINAL IN, material: STEEL OVERALL, design_type: LOOP ENGAGING, tongue_width: 0.500 INCHES NOMINAL IN, hole_diameter: 0.144 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-139-6816, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15834NICKEL
NSN: 5340-00-139-6816
FSC: 5340 — Hardware, Commercial
CAGE: 14608 — EMHART INDUSTRIES INC CORBIN CABINET LOCK HARDWARE DIV (USA)
SPECIFICATIONS
width0.625 INCHES NOMINAL IN
height0.218 INCHES NOMINAL IN
materialSTEEL OVERALL
design_typeLOOP ENGAGING
tongue_width0.500 INCHES NOMINAL IN
hole_diameter0.144 INCHES NOMINAL IN
hole_quantity2
tongue_length0.249 INCHES NOMINAL IN
overall_length0.625 INCHES NOMINAL IN
operation_methodLEVER
style_designatorLEVER
surface_treatmentNICKEL OVERALL
NSN5340-00-139-6816
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 15834NICKEL MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE HOLE QUANTITY: 2
•
TONGUE WIDTH: 0.500 INCHES NOMINAL IN
•
DESIGN TYPE: LOOP ENGAGING
•
ENGAGING SURFACE WIDTH: 0.500 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEVER
•
CATCH STRIKE STYLE: MORTISE
TECHNICAL CHARACTERISTICS
SURFACE HOLE QUANTITY2
TONGUE WIDTH0.500 INCHES NOMINAL IN
DESIGN TYPELOOP ENGAGING
ENGAGING SURFACE WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORLEVER
CATCH STRIKE STYLEMORTISE
OVERALL LENGTH0.625 INCHES NOMINAL IN
HEIGHT0.218 INCHES NOMINAL IN
SURFACE HOLE DIAMETER0.144 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
2196W11-001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 15834NICKEL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15834NICKEL?
15834NICKEL is a CATCH,CLAMPING.
What parts can replace 15834NICKEL?
There is 1 known substitute for 15834NICKEL: 2196W11-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 15834NICKEL?
15834NICKEL is cataloged in the U.S. Government catalog under NSN 5340-00-139-6816. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15834NICKEL