PartsTable
Technical Data Sheet
Download PDF

158159 — CLAMP,SYNCHRO

✓ Government record, cited
Disguise · ORING SEAL
PRODUCT OVERVIEW

158159: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a Disguise industrial component. Key specifications include width: 0.250 INCHES NOMINAL IN, height: 0.190 INCHES NOMINAL IN, length: 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 6061, hole_diameter: 0.089 INCHES NOMINAL IN, furnished_items: LOCKNUT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-304-3077, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
158159
NSN: 5340-01-304-3077
FSC: 5340 — Hardware, Commercial
CAGE: 07147 — HORIZON AEROSPACE LLC DBA TRANSICOIL (USA)
SPECIFICATIONS
width0.250 INCHES NOMINAL IN
height0.190 INCHES NOMINAL IN
length0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
materialALUMINUM ALLOY 6061
hole_diameter0.089 INCHES NOMINAL IN
furnished_itemsLOCKNUT
material_document_and_classificationQQ-A-225/8,TEMPER 651 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-304-3077
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 158159 MFR: Disguise ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8,TEMPER 651 FED SPEC SINGLE MATERIAL RESPONSE
•
HEIGHT: 0.190 INCHES NOMINAL IN
•
WIDTH: 0.250 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 6061
•
FURNISHED ITEMS: LOCKNUT
•
HOLE DIAMETER: 0.089 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8,TEMPER 651 FED SPEC SINGLE MATERIAL RESPONSE
HEIGHT0.190 INCHES NOMINAL IN
WIDTH0.250 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 6061
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.089 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 158159?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 158159?
158159 is a CLAMP,SYNCHRO manufactured by Disguise.
What is the NSN for 158159?
158159 is cataloged in the U.S. Government catalog under NSN 5340-01-304-3077. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 158159

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.