PartsTable
Technical Data Sheet
Download PDF

158145 — BRACKET,EYE,NONROTATING SHAFT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

158145: BRACKET,EYE,NONROTATING SHAFT.

The BRACKET,EYE,NONROTATING SHAFT is a the manufacturer industrial component. Key specifications include width: 0.906 INCHES NOMINAL IN, material: STEEL, overall_height: 0.813 INCHES NOMINAL IN, overall_length: 2.594 INCHES NOMINAL IN, bore_inside_diameter: 0.031 INCHES NOMINAL IN, fsc_application_data: TELETYPE AND FACSIMILE EQUIPMENT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-404-2947, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
158145
NSN: 5340-00-404-2947
NIINs: 004042947, 006522553
FSC: 5340 — Hardware, Commercial
CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
width0.906 INCHES NOMINAL IN
materialSTEEL
overall_height0.813 INCHES NOMINAL IN
overall_length2.594 INCHES NOMINAL IN
bolt_hole_quantity2
bore_inside_diameter0.031 INCHES NOMINAL IN
fsc_application_dataTELETYPE AND FACSIMILE EQUIPMENT
NSN5340-00-404-2947
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 158145 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 0.375 INCHES NOMINAL IN
•
CORNER RADIUS: 1.000 INCHES NOMINAL IN
•
LENGTH: 6.875 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 6.125 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG WIDTH: 3.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
•
SECURING DEVICE TYPE: TURNLOCK FASTENER
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH0.375 INCHES NOMINAL IN
CORNER RADIUS1.000 INCHES NOMINAL IN
LENGTH6.875 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG LENGTH6.125 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG WIDTH3.750 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLAT
SECURING DEVICE TYPETURNLOCK FASTENER
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH0.375 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLERECTANGLE, FOUR HOLES
WIDTH4.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 158145?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 158145?
158145 is a BRACKET,EYE,NONROTATING SHAFT.
What is the NSN for 158145?
158145 is cataloged in the U.S. Government catalog under NSN 5340-00-404-2947. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 158145

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.