PartsTable
Technical Data Sheet
Download PDF

158-361 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

158-361: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.438 INCHES NOMINAL IN, length: 0.750 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.156 INCHES NOMINAL IN, overall_height: 0.750 INCHES NOMINAL IN, surface_treatment: NICKEL OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-616-5740, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
158-361
NSN: 5340-00-616-5740
FSC: 5340 — Hardware, Commercial
CAGE: 25980 — GRACO INC. (USA)
SPECIFICATIONS
width0.438 INCHES NOMINAL IN
length0.750 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.156 INCHES NOMINAL IN
overall_height0.750 INCHES NOMINAL IN
surface_treatmentNICKEL OVERALL
material_thickness0.020 INCHES NOMINAL IN
loop/holding_dimension1.500 INCHES NOMINAL IN
NSN5340-00-616-5740
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 158-361 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.750 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 1.500 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL OVERALL
•
WIDTH: 0.438 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.156 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.750 INCHES NOMINAL IN
LENGTH0.750 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION1.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL OVERALL
WIDTH0.438 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.156 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 158-361?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 158-361?
158-361 is a CLIP,SPRING TENSION.
What is the NSN for 158-361?
158-361 is cataloged in the U.S. Government catalog under NSN 5340-00-616-5740. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 158-361

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.