PartsTable / COMPONENT / 15799
15799
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: STEEL OVERALL, thickness: 0.094 INCHES NOMINAL IN, body_width: 6.000 INCHES NOMINAL6.000 INCHES NOMINAL IN, body_height: 8.000 INCHES NOMINAL8.000 INCHES NOMINAL IN, body_length: 6.750 INCHES NOMINAL6.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-037-7664, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
15799
NSN: 5330-00-037-7664 FSC: 5330 CAGE: 81982 — HYDRO-AIRE AEROSPACE CORP (USA)
SPECIFICATIONS
length 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT material STEEL OVERALL thickness 0.094 INCHES NOMINAL IN body_width 6.000 INCHES NOMINAL6.000 INCHES NOMINAL IN body_height 8.000 INCHES NOMINAL8.000 INCHES NOMINAL IN body_length 6.750 INCHES NOMINAL6.750 INCHES NOMINAL IN hole_diameter 0.342 INCHES MINIMUM AND 0.346 INCHES MAXIMUM IN overall_width 0.8750 INCHES NOMINAL IN heat_treatment T-3511 SOLUTION HEAT TREATED inclosure_type HERMETICALLY SEALEDHERMETICALLY SEALED overall_height 1.500 INCHES NOMINAL IN first_tip_style SQUARE END NSN 5330-00-037-7664
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 15799
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• BOLT CIRCLE DIAMETER: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM IN
• CROSS-SECTIONAL THICKNESS: 0.016 INCHES NOMINAL IN
• OUTSIDE DIAMETER: 1.584 INCHES MINIMUM AND 1.604 INCHES MAXIMUM IN
• HOLE DIAMETER: 0.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
• MATERIAL: PAPER AND GLUE OVERALL
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
BOLT CIRCLE DIAMETER 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM IN CROSS-SECTIONAL THICKNESS 0.016 INCHES NOMINAL IN OUTSIDE DIAMETER 1.584 INCHES MINIMUM AND 1.604 INCHES MAXIMUM IN HOLE DIAMETER 0.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN MATERIAL PAPER AND GLUE OVERALL CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
15799 Interchangeable interchangeable cross-reference
interchangeable
SCC85274 Interchangeable interchangeable cross-reference
interchangeable
SMC185209 Interchangeable interchangeable cross-reference
interchangeable
60-11991 Interchangeable interchangeable cross-reference
interchangeable
AMS-QQ-A-200/3 Interchangeable interchangeable cross-reference
interchangeable
BAC1514-156 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 15799?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15799?
15799 is a RESISTOR,VARIABLE,NONWIRE WOUND,.
What parts can replace 15799?
There are 11 known substitutes for 15799: 15799, SCC85274, SMC185209 and 8 more. Substitute compatibility should be verified for your specific system.
Is 15799 still available?
15799 is currently cancelled.