PartsTable
Technical Data Sheet
Download PDF

15749C4L — FASTENER,PAWL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

15749C4L: FASTENER,PAWL.

The FASTENER,PAWL is a the manufacturer industrial component. Key specifications include diameter: 0.8750 INCHES NOMINAL IN, material: COPPER ALLOY OVERALL, pawl_type: STRAIGHT, pawl_swing_angle: 90.0 DEGREES NOMINAL, style_designator: KNURLED, operational_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-463-2704, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15749C4L
NSN: 5340-01-463-2704
FSC: 5340 — Hardware, Commercial
CAGE: 0BTF0 — EASTERN CO THE CCL SECURITY PRODUCTS (USA)
SPECIFICATIONS
diameter0.8750 INCHES NOMINAL IN
materialCOPPER ALLOY OVERALL
pawl_typeSTRAIGHT
pawl_swing_angle90.0 DEGREES NOMINAL
style_designatorKNURLED
operational_directionRIGHT-HAND
pawl_actuation_methodKEY
end_item_identificationUSNS STALWART CLASS TAGOS
mounting_plate_to_pawl_distance0.500 INCHES NOMINAL IN
pawl_length_from_actuating_shaft_center_to_pawl_end1.250 INCHES NOMINAL IN
NSN5340-01-463-2704
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 15749C4L MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATIONAL DIRECTION: RIGHT-HAND
•
MOUNTING PLATE TO PAWL DISTANCE: 0.500 INCHES NOMINAL IN
•
PAWL ACTUATION METHOD: KEY
•
STYLE DESIGNATOR: KNURLED
•
DIAMETER: 0.8750 INCHES NOMINAL IN
•
PAWL TYPE: STRAIGHT
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
OPERATIONAL DIRECTIONRIGHT-HAND
MOUNTING PLATE TO PAWL DISTANCE0.500 INCHES NOMINAL IN
PAWL ACTUATION METHODKEY
STYLE DESIGNATORKNURLED
DIAMETER0.8750 INCHES NOMINAL IN
PAWL TYPESTRAIGHT
END ITEM IDENTIFICATIONUSNS STALWART CLASS TAGOS
MATERIALCOPPER ALLOY OVERALL
PAWL LENGTH FROM ACTUATING SHAFT CENTER TO PAWL END1.250 INCHES NOMINAL IN
PAWL SWING ANGLE90.0 DEGREES NOMINAL
SUBSTITUTES & CROSS-REFERENCES 2
700387-01-107Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
PL-700387-01-107 REV G ITEM 39Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 15749C4L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15749C4L?
15749C4L is a FASTENER,PAWL.
What parts can replace 15749C4L?
There are 2 known substitutes for 15749C4L: 700387-01-107, PL-700387-01-107 REV G ITEM 39. Substitute compatibility should be verified for your specific system.
What is the NSN for 15749C4L?
15749C4L is cataloged in the U.S. Government catalog under NSN 5340-01-463-2704. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15749C4L