PartsTable
Technical Data Sheet
Download PDF

15745-1 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

15745-1: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 0.8480 INCHES NOMINAL IN, bore_diameter: 0.7500 INCHES NOMINAL IN, special_features: 0.0620 IN. BY 45 DEG CHAMFER BACK-FACE CORNER RADIUS IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.8480 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 3110-00-100-3705, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15745-1
NSN: 3110-00-100-3705
NIINs: 001003705, 013135755
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width0.8480 INCHES NOMINAL IN
bore_diameter0.7500 INCHES NOMINAL IN
special_features0.0620 IN. BY 45 DEG CHAMFER BACK-FACE CORNER RADIUS IN
style_designatorNORMAL ANGLE
cone_corner_radius0.8480 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-3705
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 15745-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.8480 INCHES NOMINAL IN
•
CONE WIDTH: 0.8480 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 0.7500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.8480 INCHES NOMINAL IN
CONE WIDTH0.8480 INCHES NOMINAL IN
SPECIAL FEATURES0.0620 IN. BY 45 DEG CHAMFER BACK-FACE CORNER RADIUS IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER0.7500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 9
T09074Reference document
Same NSN cross-reference
Reference document — Secondary reference
9A09074Reference document
Same NSN cross-reference
Reference document — Secondary reference
2953AReference document
Same NSN cross-reference
Reference document — Secondary reference
09074Reference document
Same NSN cross-reference
Reference document — Secondary reference
9211Reference document
Same NSN cross-reference
Reference document — Secondary reference
A1216Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 15745-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15745-1?
15745-1 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 15745-1?
There are 9 known substitutes for 15745-1: T09074, 9A09074, 2953A and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 15745-1?
15745-1 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3705. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15745-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.