PartsTable
Technical Data Sheet

157 5/64 — ADAPTOR,EXHAUST,GASKET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

157 5/64: ADAPTOR,EXHAUST,GASKET.

The ADAPTOR,EXHAUST,GASKET is a the manufacturer industrial component. Key specifications include end_item_identification: UNITED KINGDOM T45 EMERGENCY DIESEL GENERATOR SET, part_name_assigned_by_controlling_agency: ADAPTOR, EXHAUST, GASKET. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-207-9441, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
157 5/64
NSN: 5310-00-207-9441
NIINs: 002079441, 014600285, 015783643
FSC: 5310 — Nuts and Washers
CAGE: 6K4C8 — GOODRICH CORPORATION (USA)
SPECIFICATIONS
end_item_identificationUNITED KINGDOM T45 EMERGENCY DIESEL GENERATOR SET
part_name_assigned_by_controlling_agencyADAPTOR, EXHAUST, GASKET
NSN5310-00-207-9441
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 157 5/64 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
•
NUT LENGTH: 1.516 INCHES MINIMUM AND 1.546 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
•
THREAD SERIES: UNF
•
PLATE WIDTH: 0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
•
TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
MOUNTING HOLE DIAMETER: 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
NUT LENGTH1.516 INCHES MINIMUM AND 1.546 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
THREAD SERIESUNF
PLATE WIDTH0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
MOUNTING HOLE DIAMETER0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 3
52NA1-080Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
52TA1-080Reference document
Same NSN cross-reference
Reference document — Secondary reference
52A1-080Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 157 5/64?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 157 5/64?
157 5/64 is a ADAPTOR,EXHAUST,GASKET.
What parts can replace 157 5/64?
There are 3 known substitutes for 157 5/64: 52NA1-080, 52TA1-080, 52A1-080. Substitute compatibility should be verified for your specific system.
What is the NSN for 157 5/64?
157 5/64 is cataloged in the U.S. Government catalog under NSN 5310-00-207-9441. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 157 5/64

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.