PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1567648
1567648 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.118 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.293 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN, thread_length: 1.250 INCHES MINIMUM IN, screw_material: STEEL COMP 1010 OR STEEL COMP 1020 OR STEEL COMP 1008. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-753-9125, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1567648
NSN: 5305-00-753-9125
FSC: 5305
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.118 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.293 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
thread_length1.250 INCHES MINIMUM IN
screw_materialSTEEL COMP 1010 OR STEEL COMP 1020 OR STEEL COMP 1008
fastener_length1.781 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM OR ZINC
thread_quantity_per_inch32
NSN5305-00-753-9125
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1567648 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.781 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNF
•
THREAD LENGTH: 1.250 INCHES MINIMUM IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD QUANTITY PER INCH: 32
•
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1020 OR STEEL COMP 1008
•
HEAD HEIGHT: 0.118 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH1.781 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNF
THREAD LENGTH1.250 INCHES MINIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH32
SCREW MATERIALSTEEL COMP 1010 OR STEEL COMP 1020 OR STEEL COMP 1008
HEAD HEIGHT0.118 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD DIAMETER0.293 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
11563Interchangeable
interchangeable cross-reference
interchangeable
41991Interchangeable
interchangeable cross-reference
interchangeable
473B1Interchangeable
interchangeable cross-reference
interchangeable
914020Interchangeable
interchangeable cross-reference
interchangeable
KC7902Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1567648?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1567648?
1567648 is a SCREW,MACHINE.
What parts can replace 1567648?
There are 5 known substitutes for 1567648: 11563, 41991, 473B1 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1567648?
1567648 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-753-9125. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1567648

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026