PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 15614M1
15614M1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, outside_diameter: 1.565 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 1.561 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-423-4904, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15614M1
NSN: 5330-00-423-4904
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
outside_diameter1.565 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter1.561 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.125 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-423-4904
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 15614M1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.565 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.561 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SURFACE TREATMENT: PLASTIC CASE
•
ACCOMMODATED SHAFT DIAMETER: 1.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.565 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.561 INCHES NOMINAL IN
CASE STYLESQUARE
MATERIALSTEEL CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SURFACE TREATMENTPLASTIC CASE
ACCOMMODATED SHAFT DIAMETER1.125 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
206-076-036-1Interchangeable
interchangeable cross-reference
interchangeable
11067Interchangeable
interchangeable cross-reference
interchangeable
206-076-036-001Interchangeable
interchangeable cross-reference
interchangeable
SC-092Interchangeable
interchangeable cross-reference
interchangeable
SC-092-1Interchangeable
interchangeable cross-reference
interchangeable
540556Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15614M1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15614M1?
15614M1 is a SEAL,PLAIN ENCASED.
What parts can replace 15614M1?
There are 16 known substitutes for 15614M1: 206-076-036-1, 11067, 206-076-036-001 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 15614M1?
15614M1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-423-4904. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15614M1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026