PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1560H34-002-2
1560H34-002-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LEAF,BUTT HINGE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY BODY, hinge_pin: NOT INCLUDED, knuckle_type: FRICTION, knuckle_length: 0.493 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN, overall_length: 2.000 INCHES NOMINAL IN, performance_type: NOT RATED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-326-3442, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1560H34-002-2
NSN: 5340-00-326-3442
FSC: 5340
CAGE: 81996 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialALUMINUM ALLOY BODY
hinge_pinNOT INCLUDED
knuckle_typeFRICTION
knuckle_length0.493 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN
overall_length2.000 INCHES NOMINAL IN
knuckle_quantity2
performance_typeNOT RATED
style_designatorBUTT STAGGERED HOLES
material_thickness0.188 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
mounting_hole_diameter0.191 INCHES NOMINAL IN
mounting_hole_quantity4
NSN5340-00-326-3442
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1560H34-002-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HINGE PIN: NOT INCLUDED
•
PERFORMANCE TYPE: NOT RATED
•
PIN CENTER TO BODY EDGE DISTANCE: 3.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: BUTT STAGGERED HOLES
•
MATERIAL: ALUMINUM ALLOY BODY
•
MOUNTING HOLE DIAMETER: 0.191 INCHES NOMINAL IN
•
KNUCKLE INSIDE DIAMETER: 0.312 INCHES NOMINAL IN
•
KNUCKLE TYPE: FRICTION
TECHNICAL CHARACTERISTICS (FLIS)
HINGE PINNOT INCLUDED
PERFORMANCE TYPENOT RATED
PIN CENTER TO BODY EDGE DISTANCE3.000 INCHES NOMINAL IN
STYLE DESIGNATORBUTT STAGGERED HOLES
MATERIALALUMINUM ALLOY BODY
MOUNTING HOLE DIAMETER0.191 INCHES NOMINAL IN
KNUCKLE INSIDE DIAMETER0.312 INCHES NOMINAL IN
KNUCKLE TYPEFRICTION
MOUNTING HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH1.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
2357Upgraded Successor
successor cross-reference
successor
2-550Interchangeable
interchangeable cross-reference
interchangeable
202357Interchangeable
interchangeable cross-reference
interchangeable
SC-D-61023-2Interchangeable
interchangeable cross-reference
interchangeable
225-28Interchangeable
interchangeable cross-reference
interchangeable
X-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1560H34-002-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1560H34-002-2?
1560H34-002-2 is a LEAF,BUTT HINGE.
What parts can replace 1560H34-002-2?
There are 14 known substitutes for 1560H34-002-2: 2357, 2-550, 202357 and 11 more. Substitute compatibility should be verified for your specific system.
Is 1560H34-002-2 still available?
1560H34-002-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1560H34-002-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026